DOOSAN DVC 320 (2) Pallet CNC VMC

DOOSAN DVC 320 (2) Pallet CNC VMC

* Fanuc 21iM Control
* High speed 12,000 RPM precision spindle
* Powerful 10 hp spindle motor
* Cartridge spindle design
* High Precision spindle with two double-row cylindrical
roller bearings and two angular contact bearings
* Spindle air blow (M14)
* Spindle Orientation
* Spindle overide 50% to 150%
* Rigid tapping
* Memory Random (14) ATC with 1.2 second T-T
* Automatic 5 second indexing with (2) T-slotted pallets
* Hydraulic pallet clamping
* Portable Manual Pulse Generator
* Program and data protection key switch
* 120 degree, Swiveling operator console
* Compact Traveling column design
* One piece Meehanite cast iron bed
* Large Linear Motion Guides
* Oversized ball screws and 1.6 hp servo drives mounted directly
to ballscrews by flexible couplings
* Fast 1,417 IPM X,Y and 1,890 IPM Z rapid traverse
* Metered piston distributor lubrication
* Telescopic way covers
* Base Flush Chip Disposal
* Fully enclosed work area (including top)
* Flood coolant with large separate coolant tank
* Work light
* Operator call lamp (red, yellow, green)

CAPACITY:
X axis travel 20.4 inches
Y axis travel 12.6 inches
Z axis travel 13.7 inches
Table type Dual type pallet changer
Table indexing 180 degrees
Table Size 23.6” x 14.17” per side
Allowable table load 330 pounds per pallet
Table T - slots (3) – 3.93” x .55”

SPINDLE:
Spindle nose to tabletop 5.9 - 19.6 inches
Spindle center to column 18.5 inches
Spindle taper ISO No. 30
Spindle speed 12,000 RPM
AC spindle motor (30 minutes) 10 hp
Spindle torque (30 minutes) 35 ft-lbs.

AUTOMATIC TOOL CHANGER:
Number of tools 14
Tool shank BT 30
Maximum tool diameter 3.15 inches
Maximum tool length 7.87 inches
Maximum tool weight 6.2 pounds
Tool to tool change time 1.2 sec.
Chip to chip change time 2.2 sec.

MOTION:
X and Y axis rapid traverse rate 1,417 IPM
Z axis rapid traverse rate 1,890 IPM
Maximum cutting feed rate 787 IPM
Least command increment . 0001”
X, Y & Z-axis servomotors 2.1 hp
*Positioning accuracy (X,Y, and Z axis) +/- .0002 (full stroke)
*Repeatability (X,Y, and Z axis) +/- .00008

GENERAL:
Machine height 91”
Machine length & width 114" x 67"
Machine net weight 11,000 pounds
Voltage required 220 volt / 3 phase
KVA required 25