Filters
EDM Machines (2)
Fabrication (6)
Lathes & Turning (13)
Machining Centers (42)
Milling (3)
Sort By
HAAS VF-6/50 CNC VMC #50 Taper, TSC , 4th Ready, built 12/2006
Machining Centers, Machining Centers, VerticalStock #: 204089
Used - Excellent
Under power in shop, in beautiful condition. Through Spindle Coolant, #50Taper, 2 Speed Geared Head, 4th Axis Ready
MITUTOYO BHN1325 DCC 50” x 100” x 40” CMM
Coordinate Measuring MachinesStock #: 204088
Used - Excellent
Condition: Super Nice Condition, under power in service and available for inspection Last Calibration : Dec, 2021 Location: San Jose, California
50in
X
100in
Y
40in
Z
GOM ATOS ll Type Rev.02 Triple Scan 3D Scanner New: 2012 Comes with computer & software. Location: San Diego, California System – ATOS ll Rev. 02 Camera pixels – 2 x 5 000 000 Minimum measuring a...
Daewoo DMV-5025 51" x 25" VMC with Fanuc 21i-MB CNC Control
Vertical Machining CentersStock #: 204086
Used - Excellent
Machine in beautiful condition, mostly aluminum machining.
51in
X
25.5in
Y
24.6in
Z
20hp
Power
2013 HAAS ST-10 CNC Turning Center (Low Hours) Tailstock,Tool Presetter, Tailstock
Lathes & Turning, Lathes, Hollow SpindleStock #: 204085
Used - Excellent
VERY LOW HOURS, UNDER POWER AND AVAILABLE FOR INSPECTION. LOCATION: San Diego
25.25in
Swing
16.5in
Machining Length
--
# Axis
6.5in
Chuck Size
Haas VF-3B CNC VMC with 40 Pos. Side Mount ATC, 30HP, 10K RPM new 10/2008
Machining Centers, Machining Centers, VerticalStock #: 204084
Used - Excellent
MOSTLY ALUMINUM MACHINING.
5” KURAKI Model AKB-13 CNC Table Type Horizontal Boring Mill Installed New 2014
Horizontal Table Type Boring MillsStock #: 204083
Used - Excellent
5.1in
Spindle Size
118in
X-Horiz Tvl of Table
78in
Y-Vert Tvl of Head
40hp
Power
HURCO TM8 CNC TURNING CENTER with HURCO MAX CNC CONTROL
Lathes & Turning, Lathes, CNCStock #: 204082
Used - Excellent
HURCO VM-10 26” x 16” x 20 4-Axis CNC VMC. 20 Pos ATC, 10,000 RPM new 2011
Machining Centers, Machining Centers, VerticalStock #: 204081
Used - Good
Very clean machine, in shop under power.
DMG MORI Model DMC 1035 V ECOLINE 40” x 20” VMC, 12,000 RPM - New 2013
Vertical Machining CentersStock #: 204079
Used - Excellent
Beautiful condition, under power and available for inspection.
40.7in
X
19.9in
Y
20.1in
Z
13hp
Power
.jpg)
Toyoda FH-500J Horizontal Machining Center, 2018- Full 4th, Fanuc 32i , Big Plus, TSC
Horizontal Machining CentersStock #: 204078
Used - Excellent
Toyoda FH-500J Horizontal Machining Center, 2018- Full 4th, Server, TSC Pallet Size (2x): 19.68″ x 19.68″ (500 mm x 500 mm) Pallet Load: 1,100 lbs Pallet Indexing: 0.001 degree (Full NC table 360,0...
28.74in
X
28.74in
Y
33.46in
Z
50hp
Power
141” TOSHIBA SHIBAURA CNC VERTICAL BORING MILL with GE FANUC 16i-T CNC Control
Boring Mills, VerticalStock #: 204076
UNDER POWER IN AEROSPACE FACILITY.
DOOSAN Model DMV6030 60" x 30" x 24" VMC new 2007 with Fanuc 21i-MB Control
Vertical Machining CentersStock #: 204075
Used - Excellent
UNDER POWER IN BEAUTIFUL CONDITION, MOSTLY ALUMINUM MACHINING
60in
X
30in
Y
24.6in
Z
30hp
Power
HAAS VF4 50” x 20” x 30” VMC , 20HP Vector Drive – New 02-2000 - Mostly Aluminum Machining
Machining Centers, Machining Centers, VerticalStock #: 204074
Used - Good
HAAS VF4 50” x 20” x 30” VMC , 20HP Vector Drive – New 02-2000 ( Mostly Aluminum Machining) Under power, San Jose, California X Axis Travel: 50" Y Axis Travel: 20" Z Axis Travel: 25" Rapid ...
23.6” MIGHTY VIPER Model VTL 600LT Vertical Turning Center, Fanuc 0iTD
Boring Mills, VerticalStock #: 204072
Used - Excellent
23.6” MIGHTY VIPER Model VTL 600LT Vertical Turning Center Control: Fanuc 0iTD Condition: Excellent Table Diameter: 12" Max. Turning Diameter: 23.6" Max. Swing: 23.6" Max. Turning Height: 15....
HAAS VF-1 CNC VERTICAL MACHINING CENTER , 10,000 RPM,20HP Vector Drive - 2006
Machining Centers, Machining Centers, VerticalStock #: 204071
Used - Excellent
“Super Nice” Condition, under power, used for light machining Mostly Plastics and some Aluminum.
2010 Haas VF-3 CNC Vertical Machining Center, 8,100 RPM
Machining Centers, Machining Centers, VerticalStock #: 204070
Used - Excellent
"Super Nice" Used for light Machining, mostly Aluminum and Plastics
72” x 1-1/4” JM MONTGOMERY MODEL 4R72125 HYD. 4 ROLL PLATE ROLL
Fabrication, Rolls, Plate BendingStock #: 204069
Used - Good
72” x 1-1/4” JM MONTGOMERY MODEL 4R72125 HYD. 4 ROLL PLATE ROLL TYPE: HYDRAULIC DOUBLE INITIAL PINCH CAPACITY: 72” x 1-1/4” ROLLS: 4 TYPE: HYDRAULIC ROLL DIAMETER: 12” MOTOR: 40 HP VOLTAGE: 460V/ ...
18" / 25" x 40" G HWACHEON PRECISION GAP BED LATHE with THREADING
Gap LathesStock #: 204068
Used - Good
IN VERY NICE CONDITION, UNDER POWER IN SHOP
18in
Swing
25.9in
Gap Swing
40in
Centers
nullin
Spindle Bore
51" Swing Mighty Viper VTL-10/14 CNC VTL with Fanuc Control Built 2018 - Like New Condition
Lathes & Turning, Lathes, VTLStock #: 204062
Used - Excellent
Like New Condition!
39.37in
Table Dia
51.1in
Swing
50in
Work Ht-U/R
60hp
Power
33T
Tonnage
58station
# Turret Stations
2000 Haas VF-1 CNC VMC, Programmable Coolant, Chip Auger
Machining Centers, Machining Centers, VerticalStock #: 204057
Used - Good
MACHINE IN VERY NICE CONDITION WITH NO KNOWN ISSUES, MOSTLY ALUMINUM MACHINING.
Haas Mini Mill - Mostly Aluminum Machining
Machining Centers, Machining Centers, VerticalStock #: 204056
Used - Good
UNDER POWER IN GOOD RUNNING CONDITION, WITH NO KNOWN ISSUES, MOSTLY ALUMINUM MACHINING.
2015 Ganesh VMC2416 Express with Fanuc 0i-MF CNC Control, Coolant Thru, Chip Conveyor
Machining Centers, Machining Centers, VerticalStock #: 204055
Used - Excellent
Beautiful Condition, can be inspected under power, mostly aluminum machining.
Hyundai Wia F400 CNC Vertical Machining Center , Fanuc Control New 2016
Vertical Machining CentersStock #: 204054
Used - Excellent
Under Power in Beautiful Condition, mostly Aluminum Machining
31.5in
X
18.1in
Y
20.5in
Z
20hp
Power
OKK KCV600 80”x25”x25” Heavy Duty CNC Vertical Machining Center
Vertical Machining CentersStock #: 204052
Used - Good
Under power in facility in beautiful condition, mostly aluminum machining.
80in
X
25in
Y
25in
Z
30hp
Power
MAZAK VTC-300C 65” x 30” x 26” VMC , 48 Pos. ATC, Mazatrol 640MN CNC Control New 2007
Vertical Machining CentersStock #: 204046
Used - Excellent
Machine in Beautiful Condition, Under Power in shop.
66.35in
X
30in
Y
26in
Z
15hp
Power
HAAS TR160 (Brushless) DUAL-AXIS TRUNNION TABLE FOR FULL 5-AXIS MACHINING
Tables, RotaryStock #: 204045
Used - Excellent
Unit is in beautiful condition with little use as most of 5-Axis Machining done on Japanese 5-Axis machines. Can be used on Haas VF2 VMC or Larger.
6.3in
Table Size-X
6.3in
Table Size-Y
Unit in very nice condition, used as a backup saw to cut mainly aluminum in a large facility.
16in
Rect-Cap (H)
16in
Rect-Cap (W)
16in
Rounds-Cap
16in
Square-Cap
Okuma Howa HL-20 CNC Turning Center with Fanuc 18i-TB Control
Lathes & Turning, Lathes, CNCStock #: 204036
Used - Good
Under Power in very nice condition.